chapter

Limits and Continuity Short Notes for GATE CS

Limits and Continuity short notes for GATE CS: 3 study cards covering concepts, formulas, shortcuts and exam traps, plus solved practice questions.

limits and continuity short notes

Quick Revision Checklist

Quick Revision Checklist 1 Check Form: Always substitute first. 2 Standard Limits: Use for \frac{s i n x}{x}, \frac{e ^{x} - 1}{x} etc. 3 L'Hôpital: Best for \frac{0}{0} or \frac{\infty}{\infty} . Differentiate top/bottom separately. 4 Taylor Series: Best for complex mixes or high powers. 5 1^{\infty} Formula: e^{l i m (f - 1) g} . 6 Rationalization: Use for square roots if L'Hôpital is messy.

Exam Readiness Checklist

Exam Readiness Checklist Find the Boundary: Identify junction point(s) c . Compute the 3 Values: LHL, RHL, and f (c) . Equate: Set LHL = RHL = f (c) to solve for constants. Check Singularities: Ensure limits with ln (x), 1/ x don't blow up. Verify the Pieces: Ensure g (x) and h (x) are continuous in their intervals.

Final Revision Checklist

Final Revision Checklist Source of Discontinuity: Abrupt change in decimal digits at rational boundaries. Boundary Identification: For k -th digit, boundaries are \frac{m}{1 0 ^{k}} . Verification: Compare f (x) at the boundary with lim_{t \to x^{-}} f (t) . Modulo Trick: d_{left} = (d_{point} - 1) (mod 10) . Counting: Analyze one cycle of 10 digits, then scale by 1 0^{k - 1} . Worked example answer 40

Try a question

Answer it here to see how it works. Nothing is recorded until you sign in.

Question 1

Level 1: Warm-up

Consider the standard limits L_{1} = lim_{x \to 0} \frac{e ^{x} - 1}{x}, L_{2} = lim_{x \to 0} \frac{l n ( 1 + x )}{x}, and L_{3} = lim_{x \to 0} \frac{e ^{2 x} - 1}{x} . What is the maximum value among L_{1}, L_{2}, L_{3} ?

Question 2

Level 1: Warm-up

To evaluate the following limit using L'Hôpital's rule: x \to 0 lim \frac{e ^{x} - x - 1}{x ^{2}} What is the minimum number of times the rule must be applied to resolve the indeterminate form?

Question 3

Level 1: Warm-up

What is the value of the following standard limit, which serves as a core engine for evaluating indeterminate forms? x \to 0 lim \frac{sin x}{x}

Question 4

Level 1: Warm-up

What is the value of the following standard limit, which serves as a fundamental building block introduced in the limits chapter? x \to 0 lim \frac{7 ^{x} - 1}{x}

Question 5

Level 1: Warm-up

A function f (x) outputs 1 if the first decimal digit d_{1} is even, and 0 if d_{1} is odd. What is the minimum number of points of discontinuity for f (x) in the open interval (0, 1) ?

Question 6

Level 1: Warm-up

If f (x) = x^{2} and g (x) = x^{3}, what is the value of the following limit? x \to 0^{-} lim \frac{f ( x )}{g ( x )}

Question 7

Level 1: Warm-up

If f (x) = x^{2} and g (x) = x^{5}, what is the value of the following limit? x \to 0^{-} lim \frac{f ( x )}{g ( x )}

Question 8

Level 1: Warm-up

Consider a piecewise function f (x) defined as g (x) for x < c and h (x) for x \geq c . Assuming g (x) and h (x) are continuous on their respective open intervals, which of the following statements is true?

Question 9

Level 1: Warm-up

If a function f (x) depends on the third decimal digit d_{3} of x, what is the maximum number of critical points (boundaries where d_{3} changes) in the open interval (0, 0.01) ?

Question 10

Level 1: Warm-up

In evaluating the limit lim_{x \to 0^{+}} \frac{x}{1 - e ^{3 x}} using the substitution t = x, which of the following statements is true regarding the bounds of t as x \to 0^{+} ?

Free preview ends here

Login to view the complete short notes

Creating an account is free. You get the rest of this chapter, step-by-step solutions, and a study plan built around the topics you are actually weak at.

Why MastersUp

Personalised first. High quality throughout.

Most platforms hand everyone the same content. Here the content moves with your performance, topic by topic.

Built around you, not around a syllabus PDF

Every answer you give moves your topic-level intelligence rate. The next question, the next revision card and tomorrow's plan all change with it.

Revision that hits your weak spots

We only revise topics you have actually attempted and are still below the safe bar on — never the same chapter on repeat.

Questions calibrated to the real exam

Each question carries a measured toughness. You are served a rung above your current level, so practice keeps stretching you.

Notes written for recall, not for volume

Full lesson cards for first study, curated short-note cards for the last mile — with derivations, traps and exam patterns marked.

One place for everything

Notes, chapter practice, previous-year questions, test series and full-length papers — all feeding one picture of your preparation.

Honest progress

No vanity streaks. Progress here means chapters mastered and accuracy that held up on harder questions.

Unlock the whole course

Full notes and short notes, the complete question bank with worked solutions, mock tests, full-length papers, and an adaptive plan that rebuilds itself as you improve.

View all plans Start free

Limits and Continuity Short Notes for GATE CS

Limits and Continuity short notes for GATE CS: 3 study cards covering concepts, formulas, shortcuts and exam traps, plus solved practice questions.

Quick Revision Checklist

Check Form: Always substitute first.

Standard Limits: Use for

\frac{s i n x}{x}

\frac{e ^{x} - 1}{x}

etc.

L'Hôpital: Best for

\frac{0}{0}

\frac{\infty}{\infty}

. Differentiate top/bottom separately.

Taylor Series: Best for complex mixes or high powers.

$1^{\infty}$ Formula:

e^{l i m (f - 1) g}

Rationalization: Use for square roots if L'Hôpital is messy.

Exam Readiness Checklist

Find the Boundary: Identify junction point(s)

c

Compute the 3 Values:

LHL

RHL

, and

f (c)

Equate: Set

LHL = RHL = f (c)

to solve for constants.

Check Singularities: Ensure limits with

ln (x)

1/ x

don't blow up.

Verify the Pieces: Ensure

g (x)

and

h (x)

are continuous in their intervals.

Final Revision Checklist

Source of Discontinuity: Abrupt change in decimal digits at rational boundaries.

Boundary Identification: For

k

-th digit, boundaries are

\frac{m}{1 0 ^{k}}

Verification: Compare

f (x)

at the boundary with

lim_{t \to x^{-}} f (t)

Modulo Trick:

d_{left} = (d_{point} - 1) (mod 10)

Counting: Analyze one cycle of 10 digits, then scale by

1 0^{k - 1}

Worked example answer 40

Limits and Continuity: Solved Questions with Step-by-Step Explanations (10 Problems)

Question 1 · Engineering Mathematics MCQ

Consider the standard limits $L_{1} = lim_{x \to 0} \frac{e ^{x} - 1}{x}$ , $L_{2} = lim_{x \to 0} \frac{l n ( 1 + x )}{x}$ , and $L_{3} = lim_{x \to 0} \frac{e ^{2 x} - 1}{x}$ . What is the maximum value among $L_{1}, L_{2}, L_{3}$ ?

A.
2
B.
1
C.
$ln 2$
D.
e

Correct Answer:

Step-by-Step Solution

Key idea: The standard limits evaluate directly to known constants.

Step 1: Recall the standard limit $lim_{x \to 0} \frac{e ^{x} - 1}{x} = 1$ . Thus, $L_{1} = 1$ .

Step 2: Recall the standard limit $lim_{x \to 0} \frac{l n ( 1 + x )}{x} = 1$ . Thus, $L_{2} = 1$ .

Step 3: Evaluate $L_{3}$ by adjusting the coefficient: $lim_{x \to 0} \frac{e ^{2 x} - 1}{x} = 2 \cdot lim_{x \to 0} \frac{e ^{2 x} - 1}{2 x} = 2 \cdot 1 = 2$ .

Step 4: Compare the values: $L_{1} = 1$ , $L_{2} = 1$ , $L_{3} = 2$ . The maximum value is 2.

Answer: 2

Question 2 · Engineering Mathematics MCQ

To evaluate the following limit using L'Hôpital's rule:

$x \to 0 lim \frac{e ^{x} - x - 1}{x ^{2}}$

What is the minimum number of times the rule must be applied to resolve the indeterminate form?

A.
1
B.
3
C.
2
D.
4

Correct Answer:

Step-by-Step Solution

Key idea: Track the form after each application of L'Hôpital's rule.

Step 1: Check initial form. As $x \to 0$ , $e^{x} - x - 1 \to 0$ and $x^{2} \to 0$ . Form is $0/0$ .

Step 2: Apply L'Hôpital's rule (1st time). Derivative of top is $e^{x} - 1$ . Derivative of bottom is $2 x$ . New limit: $lim_{x \to 0} \frac{e ^{x} - 1}{2 x}$ .

Step 3: Check new form. As $x \to 0$ , $e^{x} - 1 \to 0$ and $2 x \to 0$ . Form is still $0/0$ .

Step 4: Apply L'Hôpital's rule (2nd time). Derivative of top is $e^{x}$ . Derivative of bottom is $2$ . New limit: $lim_{x \to 0} \frac{e ^{x}}{2}$ .

Step 5: Evaluate. $\frac{e ^{0}}{2} = \frac{1}{2}$ . The form is resolved.

Answer: 2

Question 3 · Engineering Mathematics MCQ

What is the value of the following standard limit, which serves as a core engine for evaluating indeterminate forms?

$x \to 0 lim \frac{sin x}{x}$

A.
0
B.
1
C.
$\infty$
D.
undefined

Correct Answer:

Step-by-Step Solution

Key idea: This is a direct recall of a fundamental standard limit.

Step 1: Identify the form. As $x \to 0$ , $sin x \to 0$ and $x \to 0$ . This is a $0/0$ indeterminate form.

Step 2: Apply the standard limit formula $lim_{x \to 0} \frac{s i n x}{x} = 1$ .

Step 3: The value is exactly 1.

Answer: 1

Question 4 · Engineering Mathematics MCQ

What is the value of the following standard limit, which serves as a fundamental building block introduced in the limits chapter?

$x \to 0 lim \frac{7 ^{x} - 1}{x}$

A.
0
B.
1
C.
$ln 7$
D.
7

Correct Answer:

Step-by-Step Solution

Key idea: This is a direct recall of a fundamental standard limit for exponential functions.

Step 1: Identify the form. As $x \to 0$ , $7^{x} - 1 \to 0$ and $x \to 0$ . This is a $0/0$ indeterminate form.

Step 2: Apply the standard limit formula $lim_{x \to 0} \frac{a ^{x} - 1}{x} = ln a$ .

Step 3: Substitute $a = 7$ into the formula. The value is exactly $ln 7$ .

Answer: $ln 7$

Question 5 · Engineering Mathematics MCQ

A function $f (x)$ outputs 1 if the first decimal digit $d_{1}$ is even, and 0 if $d_{1}$ is odd. What is the minimum number of points of discontinuity for $f (x)$ in the open interval $(0, 1)$ ?

A.
8
B.
9
C.
10
D.
100

Correct Answer:

Step-by-Step Solution

Key idea: This is a contradiction/analysis problem to count discontinuities based on digit parity.

Step 1: Identify the target digit and boundaries. The function depends on $d_{1}$ , so boundaries are at $0.1, 0.2, \dots, 0.9$ .

Step 2: Check for jumps at each boundary. At any boundary $m /10$ , $d_{1}$ changes from $(m - 1) (mod 10)$ to $m (mod 10)$ . Since one is even and the other is odd, the function value always flips between 0 and 1.

Step 3: Count the discontinuities in $(0, 1)$ . Every boundary is a discontinuity. There are 9 boundaries ( $0.1$ to $0.9$ ).

Answer: 9

Question 6 · Engineering Mathematics MCQ

If $f (x) = x^{2}$ and $g (x) = x^{3}$ , what is the value of the following limit?

$x \to 0^{-} lim \frac{f ( x )}{g ( x )}$

A.
0
B.
1
C.
$\infty$
D.
$- \infty$

Correct Answer:

Step-by-Step Solution

Key idea: Compare the rate at which the numerator and denominator approach zero, and pay attention to the direction of the limit.

Step 1: Substitute the functions: $lim_{x \to 0^{-}} \frac{x ^{2}}{x ^{3}}$ .

Step 2: Simplify the expression for $x \neq = 0$ : $\frac{x ^{2}}{x ^{3}} = \frac{1}{x}$ .

Step 3: Evaluate the limit of the simplified expression as $x \to 0^{-}$ . Since $x$ is a small negative number, $\frac{1}{x}$ approaches $- \infty$ .

Answer: $- \infty$

Question 7 · Engineering Mathematics MCQ

If $f (x) = x^{2}$ and $g (x) = x^{5}$ , what is the value of the following limit?

$x \to 0^{-} lim \frac{f ( x )}{g ( x )}$

A.
0
B.
1
C.
$\infty$
D.
$- \infty$

Correct Answer:

Step-by-Step Solution

Key idea: Compare the rate at which the numerator and denominator approach zero, and pay attention to the direction of the limit.

Step 1: Substitute the functions: $lim_{x \to 0^{-}} \frac{x ^{2}}{x ^{5}}$ .

Step 2: Simplify the expression for $x \neq = 0$ : $\frac{x ^{2}}{x ^{5}} = \frac{1}{x ^{3}}$ .

Step 3: Evaluate the limit of the simplified expression as $x \to 0^{-}$ . Since $x$ is a small negative number, $x^{3}$ is a small negative number, so $\frac{1}{x ^{3}}$ approaches $- \infty$ .

Answer: $- \infty$

Question 8 · Engineering Mathematics MCQ

Consider a piecewise function $f (x)$ defined as $g (x)$ for $x < c$ and $h (x)$ for $x \geq c$ . Assuming $g (x)$ and $h (x)$ are continuous on their respective open intervals, which of the following statements is true?

A.
$f (x)$ is continuous everywhere if $lim_{x \to c^{-}} g (x) = lim_{x \to c^{+}} h (x)$ .
B.
$f (x)$ can only be discontinuous at the junction point $x = c$ .
C.
$f (x)$ is continuous at $x = c$ if $g (c) = h (c)$ .
D.
$f (x)$ is always discontinuous at $x = c$ because the rules change.

Correct Answer:

Step-by-Step Solution

Key idea: A piecewise function is only at risk of breaking at the boundaries where the rules change.

Step 1: Analyze the intervals. For $x < c$ , $f (x) = g (x)$ . Since $g (x)$ is continuous on its open interval, $f (x)$ is continuous for all $x < c$ .

Step 2: For $x > c$ , $f (x) = h (x)$ . Since $h (x)$ is continuous on its open interval, $f (x)$ is continuous for all $x > c$ .

Step 3: The only point where the rule changes is $x = c$ . Therefore, the only possible point of discontinuity is at the junction $x = c$ .

Answer: $f (x)$ can only be discontinuous at the junction point $x = c$ .

Question 9 · Engineering Mathematics MCQ

If a function $f (x)$ depends on the third decimal digit $d_{3}$ of $x$ , what is the maximum number of critical points (boundaries where $d_{3}$ changes) in the open interval $(0, 0.01)$ ?

A.
9
B.
10
C.
99
D.
100

Correct Answer:

Step-by-Step Solution

Key idea: This is an observation problem to count the boundaries for a specific decimal digit.

Step 1: Identify the target digit and step size. The function depends on $d_{3}$ , so boundaries occur at multiples of $1 0^{- 3} = 0.001$ .

Step 2: List the boundaries in the interval $(0, 0.01)$ . The multiples of $0.001$ strictly between $0$ and $0.01$ are $0.001, 0.002, \dots, 0.009$ .

Step 3: Count the points. There are exactly 9 such points.

Answer: 9

Question 10 · Engineering Mathematics MCQ

In evaluating the limit $lim_{x \to 0^{+}} \frac{x}{1 - e ^{3 x}}$ using the substitution $t = x$ , which of the following statements is true regarding the bounds of $t$ as $x \to 0^{+}$ ?

A.
$t \to 0^{+}$ only
B.
$t \to 0$ from both sides
C.
$t \to 0^{-}$ only
D.
$t$ can be any real number

Correct Answer:

Step-by-Step Solution

Key idea: The domain of the square root function restricts the substitution.

Step 1: The original limit specifies $x \to 0^{+}$ , meaning $x$ approaches 0 from the positive side ( $x > 0$ ).

Step 2: We substitute $t = x$ . The square root function $x$ is only defined for $x \geq 0$ , and its output is always non-negative ( $t \geq 0$ ).

Step 3: As $x \to 0^{+}$ , $t = x$ must also approach 0 from the positive side. Therefore, $t \to 0^{+}$ only.

Answer: $t \to 0^{+}$ only

limits and continuity short notes

Quick Revision Checklist

Quick Revision Checklist

Exam Readiness Checklist

Exam Readiness Checklist

Final Revision Checklist

Final Revision Checklist

Try a question

Login to view the complete short notes

Personalised first. High quality throughout.

Built around you, not around a syllabus PDF

Revision that hits your weak spots

Questions calibrated to the real exam

Notes written for recall, not for volume

One place for everything

Honest progress

Unlock the whole course

Limits and Continuity Short Notes for GATE CS

Quick Revision Checklist

Quick Revision Checklist

Exam Readiness Checklist

Exam Readiness Checklist

Final Revision Checklist

Final Revision Checklist

Limits and Continuity: Solved Questions with Step-by-Step Explanations (10 Problems)

Step-by-Step Solution

Step-by-Step Solution

Step-by-Step Solution

Step-by-Step Solution

Step-by-Step Solution

Step-by-Step Solution

Step-by-Step Solution

Step-by-Step Solution

Step-by-Step Solution

Step-by-Step Solution

More short notes in this unit